WEN 10-Amp 6.5-Inch Plunge Cut Sidewinder Circular Track Saw, CT1065

Description

WEN 10-Amp 6.5-Inch Plunge Cut Sidewinder Circular Track Saw, CT1065

• Perfect for ripping boards or for performing internal plunge cuts
• Includes a 6.5-inch 24-tooth carbide-tipped blade (165 mm) with a 20 mm arbor
• Compatible with the WEN CT9502 100-Inch Track and the WEN CT992F Track Saw Clamps

Remember when your saw stayed on the right track. Keep your cuts on the straight and narrow with the WEN 10-Amp Sidewinder Plunge Cut Track Saw. The WEN Track Saw provides users the same results as a table or panel saw in a compact and portable package. Simply lay the track (not included – model CT9502) along the desired surface for a clean and smooth cut. The WEN Track Saw is the perfect companion for ripping plywood, trimming doors, building furniture, and any other application needing long, precise cuts. Our powerful 10-amp motor rotates the 6-1/2-inch blade up to 5500 times per minute, letting you power through even the hardest of woods. Bevel the saw 45 degrees to the left to create angled cuts in boards up to 1-5/8 inches thick. Set the depth gauge anywhere from 0 to 2-1/3 inches to control how deep the saw plunges. The 12 x 6-5/8-inch base features precision grooves that let the saw glide smoothly along the track. However, the saw can also exist on its own as a plunge saw, relying on its flat base for maximum stability and precision. Easily switch between three different blade settings: one for scoring cuts that go 1/8-inch deep, one for full plunge cuts, and one to simplify blade changes. The non-slip base cams reduce pinching and minimizes kickback. The back-mounted dust port allows for attachment to your favourite dust collection system to control sawdust and limit clean up. Simply attach your dust collection device of choice and start sawing. And, because it s a WEN product, your WEN 10-Amp Plunge Cut Circular Track Saw, a nationwide network of skilled service technicians, and a friendly customer helpline, all to make sure you remember WEN.

– Ditch the table saw: rip boards up to 2-1/3 inches thick with clean, splinter-free cuts
– Perfect for ripping boards or for performing internal plunge cuts
– Includes a 6.5-inch 24-tooth carbide-tipped blade (165 mm) with a 20 mm arbor
– Compatible with the WEN CT9502 100-Inch Track and the WEN CT992F Track Saw Clamps

• Ditch the table saw: rip boards up to 2-1/3 inches thick with clean, splinter-free cuts
• Brand: WEN
• Manufacturer Part Number: CT1065
• Manufacturer: WEN
• Assembled Product Dimensions (L x W x H): 12.00 x 9.50 x 9.50 Inches

Additional information